Overview of PPR pipe fittings for the hottest groo

  • Detail

Overview of PPR pipe fittings for grooved connection

grooved pipe fitting connection technology, also known as clamp connection technology, has become the first technology for liquid and gas pipeline connection at present. Although this technology was developed later in China than abroad, it was soon accepted by domestic market places because of its progressiveness. From 1998 to now, after just a few years of development and application, it has gradually replaced the two traditional pipe connection methods of flange and welding. It is not only technically more mature, but also widely recognized by the market, but also actively guided by national regulations and policies

on the other hand, PPR pipe fittings are PPR parts that connect pipes into pipelines. According to the connection method, it can be divided into four categories: socket pipe fittings, screw extruder, and "flange pipe" fittings and welded fittings. It is usually made of the same material as the pipe. There are elbows (elbows), flanges, tees, crosses (crossheads) and reducers (reducer), etc. Elbows are used where pipes turn; The flange is used to make the tail plate of the parts connecting the pipes jump slightly, which is connected to the pipe end, and the tee pipe is used at the place where the three pipes converge; The four-way pipe is used where the four pipes converge; Reducer is used where two pipes with different diameters are connected

Copyright © 2011 JIN SHI